Robot
Specifications:
5’8″ x 19 1/2″ x 2 1/2″
Fins: Twin side, standard fin rear
The Robot has been reborn! All the fun of the original Robot, with a slightly narrower tail and a full concave through the length of the board. It’s a high performance super-shortboard for the smallest, mushiest, crappiest waves ridable. Still pretty wide in the tail with really low rocker for the most possible speed through planing area and reduced drag. An extremely deep single concave with twin fin sides and a G3 or G5 trailing fin, with 8 degrees of fin cant in the front fins for increased lift. Order your Robot up to 8″ inches shorter than your standard board, 1″ wider and the same thickness.
|
|
Inchpincher
Specifications:
5’10” x 19 1/2″ x 2 3/8″
Fins: Thruster
High performance shortboard for weak to medium powered waves, the Inchpincher has a fuller nose shape than the Minizero but not as round as the Robot reducing the risk of forward rail catching during vertical surfing, the wide rounded square tail and deep single concave maximise lift and speed. It has a longer rail line than your normal summer plug for greater down the line speed. Pinched the rails to increase drive and control, plus increased the lift in the tail rocker to draw out rail turns at high speed. Ride 4-5″ shorter than your standard shortboard and a half inch wider with the same thickness Can be ordered as a thruster, quad or 5 fin convertible fin set up with FCS, Futures Fin system or Lokbox fin systems.
|
|
Dogtool
Specifications:
6′ x 18 1/4″ x 2 1/4″
Fins: Thruster
New for 2014, our latest high performance shortboard for quality waves and good surfers. We’ve widened the nose and tail widths ever so slightly and also lowered the under the chest entry rocker for earlier take off and increased speed.
Deep single concave and added tail lift make the Dogtool our ultimate performer. |
