www.downthelinesurf.co.uk • 01736 757025 • Down the Line Surf Company, Market Square Arcade,
Copperhouse, Hayle, Cornwall, TR27 4EA

BING
SILVER SPOON

Dimensions: 9’6″ x 23″ x 3″
Fins: Single
Shaper: Matt Calvani

A surfboard inspired by the Bing Noserider that combines the template of the Bing Lightweight with a deep blended concave, giving you lift for nose riding while maintaining speed and glide down-the-line. A popular 3-stringer square tail board for small to medium surf for any type of wave, the step in the tail gives lift for noseriding and thins out the tail for more manoeuvrability.

BING
JAMES PARRY

Dimensions: 6’10”
Fins: 2 + 1 FCS
Shaper: Ryan Lovelace

The V.Bowls makes full use of Ryan’s experience in shaping and riding displacement hulls. It transfers the feelings of slingshot bottom turns with confidence off the back foot and tackles small waves effortlessly…. and with a great deal of pleasure. There is one problem with the V.Bowls…when you buy one you will never want to ride anything else again.

BING
FERAL PIG

Dimensions: 9’6″ x 22 3/4 x 3 1/8″
Fins: Glass on fin
Shaper: Matt Calvani

The Bing Feral Pig is a collaborative project between Bing head shaper, Matt Calvani and Mike Black, founder of Surf-A-Pig. Mike says of his first Feral Pig shaped by Matt “As soon as my hands touch it, I know it is perfectly balanced. I knew this board was AMAZING. The next morning I get it on some clean waves. Immediately I felt this board was the single best board I had ever rode. By my third session I was beside myself with the board’s functionality. This board turns like a hot knife travels through butter. Typically a surfboard design does one thing well. This board does it all! Seriously.”

RYAN LOVELACE
SIDE-CUT FISH

Dimensions: 5’8″
Fins: Twin fin Futures
Shaper: Ryan Lovelace

Always hand shaped by Ryan Lovelace: the Side-Cut fish is the very definition of retro. This board is designed for smooth stylish rail to rail surfing with heaps of acceleration, and the distinctive side cut allows you to get on the rail much quicker.

RYAN LOVELACE
V-BOWLS

Dimensions: 6’10”
Fins: 2 + 1 FCS
Shaper: Ryan Lovelace

The V.Bowls makes full use of Ryan’s experience in shaping and riding displacement hulls. It transfers the feelings of slingshot bottom turns with confidence off the back foot and tackles small waves effortlessly…. and with a great deal of pleasure. There is one problem with the V.Bowls…when you buy one you will never want to ride anything else again.

VOUCH
SMALL VISH

Dimensions: 5’8″ x 20 5/8″ x 2 5/8″
Fins: Twin Futures
Shaper: Paul Hutchinson

The Vish comes from Vouch Surf, Byron Bay. Stupidly fast and oozes cruise and style. Go fast, go big on your turns, inject some style and flow in your surfing. Whether it’s a slack beachy or a barrelling pit, this board will put a smile on your face.

CHRISTENSON
TWIN FIN FISH

Dimensions: 5’4″ x 20 1/2″ x 2 3/8″
Fins: Twin Futures
Shaper: Chris Christenson

A super versatile, refined fish to the highest degree. A regular fish outline with the bulk of the foam forward on the board makes this board a great paddler. Low, sharp rails provide added bite and rail sensitivity. The tail is what Chris calls a “twin pin”, as it is effectively just that. A double pintail that in effect creates 2 pivot points, creating hold in steeper waves and really allowing you to push off them through turns without spinning out. A deep single concave runs between the fins and right through to the tail, channeling water in-between the fins for extra speed and drive.

CHRISTENSON
DEAD SLED

Dimensions: 9’6″ x 23″ x 3 1/8″
Fins: Single
Shaper: Chris Christenson

Christenson’s Dead Sled is the perfect log for both beach and point breaks. The parallel outline and the rolled vee in the tail allows for easy rail to rail transitions and makes it a great all-rounder. The 50/50 rails are slightly pinched throughout the board and the generous concave in the nose also enhances the perfect amount of lift whilst poised on the nose. All the while the boards reverse rocker will promote forward trim, making it great for noseriding.

DHD
MINI TWIN

Dimensions: 5’7″ x 20 3/4″ x 2 5/16″
Volume: 30ltr
Fins: Twin fin Futures
Shaper: Darren Hanley

The Mini Twin is made for all out summer fun! A nod towards nostalgia with a modern twist. A single to double concave with vee through the tail. Carbon reinforcements around the fins and tail. Medium to low rails. Take it out in 1-4 foot surf and have an absolute ball!

Subscriptions

Latest Issue

Digital Version